BILT HAMBER EPOXY MASTIC ULTIMATE VEHICLES CORROSION PROTECTION 1000ML

Why buy this product
Long pot life
Coverage: 10m per 2litre at 100micron dry film thickness
Corrosion Inhibitor additives
Suitable for long term immersion in marine environments

About this product
It provides the ultimate corrosion protection to chassis, vehicles, plant, and machinery.
Made in the UK with superior epoxy and low surface tension wetting hydrocarbon resins.
When compared to competing formulations this material will outperform other epoxy mastic and moisture cure urethane products.
Our epoxy mastic is further combined with pure zinc phosphate to provide unparalleled rust and corrosion proofing.

How To Use
Epoxy mastic can be applied to mechanically cleaned rusted steel, or steel cleaned by grit blasting.
Where steel is clean of rust and corrosion application of Electrox zinc rich primer will dramatically increase the long term performance and provides protection far beyond epoxy mastics applied directly to steel.
On previously corroded steel not fully clean, increased protection can be afforded by the use of Hydrate 80
Steels should be degreased and free from loose scale and debris. Aluminium, stainless steel and galvanised steel should be etch-primed with Etch-Weld self-etching primer.

Mix 4 parts of “66MAS” to 1part “66 ACC” The former is the mastic base the latter accelerator or hardener.
Stir thoroughly and apply by brush or roller. Thin and clean brushes with xylene or preferably 2-pack thinner.

Hard dry in 7hours depending on temperature and conditions, drying is retarded below 10 deg C

Specifications