Carcare24.eu - BUFX_101HEX5, Hex Logic Yellow Heavy Cutting Pad use this pad to apply compounds or polishes to remove severe oxidation, swirls, and scratches.

Temporarily out of stock
€9.95 €8.22
  • Buy 12 for €8.25 €6.82 each and save 17%


Hex-logic pads are engineered and developed for today’s pickiest detailing professionals. Engineered,
developed and tested to specific requirements of our OEM clients these pads utilize the best foams from
around the world and the latest of testing and research and development including Chemical Guys own
Self Centered backing system!

The Hexagon is not new to science it’s just new to detailing. Rather then try to reinvent some catchy gimmick,
Chemical Guys invests in technology that through the years has simply been unbeatable and improves on it.
Hex-Logic pads are designed to hold product and distribute it evenly over the surface of the pad delivering a
superior even finish that is hard to achieve with any other pad.  

Nature selected the Hexagon for storage and designed it to be one of the most efficient holding cells.
For example a mass of hexagonal wax cells built by honey bees in their nests to store honey and pollen.
The bees build the comb with 6 sides for even distribution of product fast and effectively.

Hex-logic pads and Hex-laser cut perfect every time to guarantee that every pads use and results are extremely
efficient. The Hex-Logic Pads are meant to work on flat or rounded/angled surfaces. The unique construction of
the pads makes them extremely easy to maneuver while retailing the correct amount of product evenly distributed
through the pad, Hex-Logic Pads keep product in the groves while you start and as the pad is spun and rubbed
against the surface through the hex-groves into a superior accurate finish, while keeping the surface constantly
lubricated to reduce friction and marring.

Surface of the pad enables Hex-Logic pads to conform to the shape of the surface delivering maximum surface contact.
Unique Hexagon construction form perfectly to a vehicles many curves while the unique pad construction reduces unnecessary heat.

Laser-Cut face enables Hex-logic Pads to cover a better surface area with constantly remaining constrained to the vehicle's surface delivering perfect accurate results every time.

Surface Technology.- The evolution of buffing pads.  
Developed to address weaknesses inherent in traditional foam pads, Hex-Logic technology is the first surface- functioning pad that adapts to tocurved, angled, sloped or flat surfaces delivering the maximum amount of contact and the right amount of product distribution to deliver perfect results to any surface.

Based on hexagonal Honeycomb-shaped product cells, the computer designed hex-logic system ensures proper
surface contact and even product distribution over any surface. Durable Acu-Pore foam technology combined
with hex-logic honeycomb product distribution cells enables hex-logic pads to utilize product, friction and heat to
product prefect results on any surface.

Hex-Logic foam pads perform slightly different from each other on the basis of how they are constructed. Under a
microscope, Acu-Foam technology is visibly. The foam pads also have a hex-logic honeycomb construction of
small uniformly shaped cells. Smaller the cells, more densely the construction.  Each pad color has a different
density of foam and a varying amount of cut. Once the foam style is selected the Hex-Logic computer carefully
calculates pad density and adjusts the depth of cut into the pad surface. Each Color pad will have a specific depth
of cut in reference to the hex-logic pattern on the pad surface. The foam-specific Hex-Logic cut assures the best
distribution of product while retailing the maximum coverage of surface area.

Hex-logic pads are open allowing maximum air to flow through the foam. Chemical compounds and polishes
require the right amount of air flow through the foam. Open cell foam is ideal in achieving the best results from
your chemicals.

Hex Logic Backing. Hex Logic  Professional Pads have durable, long lasting backings on them for easy wash,
maintenance and reuse. Developed for professional use Hex-Logic pads will not separate from the foam like
traditional pads. The unique glue and heat transfer bonding system assures long durable use time after time.

Hex-Logic reticulated Backing -  unique reticulated backings on each pad. Recess the backing ¼ of an inch into
the pad to assure that the backing plate and backing will never rub against the surface. Hex-Logic  Pads are
engineered, designed and manufactured 100% in the California USA.

Premium quality foam pads
Longer lasting, more durable pads
25% more surface area than regular pads
Faster easier and more accurate results
Unique patented system delivers a safer pad with less vibration
Easier to use then any pad available today

Chemical Guys Hex-Logic pads can be used with ALL POLISHERS: circular polisher, dual-action polisher and
even the Flex Polisher!


Yellow Heavy Cutting Pad - Use this pad to apply compounds or polishes to remove severe oxidation, swirls, and scratches in conjunction with a polishing compound. It is the most aggressive and should only be used on oxidized and older finishes. Always follow this pad with an orange pad and a fine polish and then a white pad to refine the paint until it is smooth.
Use With:
Cut 1.0-Heavy Cut Compound
CG Heavy Cut Compound
Cutting compounds with heavy duty grit 500-1000 grit count 
Orange Medium-Heavy Cutting Pad-This firm, high density foam is ideal for scratch and defect removal. The orange foam offers the correction of a typical compounding pad while at the same time allowing the polishing ability of light cut foam pad. When used with heavier compounds it will remove moderate swirls and scratches with little or no haze. It s an all around pad that will work on most light to moderate imperfections.  
Use With:
Cut 1.0-Heavy Cut Compound (for lighter cut then yellow pad
Cut 1.5 Medium Cut Compound
Scratch & Swirl Buff
Laser Buff
CG Medium Cut Compound
Cutting compounds with heavy duty grit 1000-1500 grit count
Green Heavy Polishing Pad - This pad is used by Mercedes Benz at OEM level and is designed to be used with a random orbital polisher (like the Porter Cable) It produces less spot heating and has a unique compression/load/deflection ratio which means it conforms quickly to contours. It is a high strength foam with 60 pores per sq. inch yet is softer and more forgiving than our regular foams which have 80 pores per sq. inch.
This pad is tough enough to remove swirls and scuffs while at the same time producing a high gloss swirl free finish. This foam is also ideal for applying one-step cleaner waxes. It is a balance of polishing and finishing that is perfect for all-in-one product application.
Use With:
Cut 1.5 Medium Cut Compound
Scratch & Swirl Buff
All-In-1 Polish
Laser Buff
CG Medium Cut Compound
Cutting compounds with heavy duty grit 1000-1500 grit count
Pro Polish- Foam Pad Polish- (As Cutting Product-when used with green pad)

White Medium -Light Polishing Pad -Less dense foam formula for the application of waxes, micro-fine polishes and sealants. This pad has very light cutting power so its perfect for pre-wax cleaners. It is the most well used pad as it is ideal for application of pre-wax cleansers as well as many finishing polishes such as Pro-Polish or FP-Final Polish.
Use With:
Cut 2.0 Light Cut Compound
Scratch & Swirl Buff
CG Light Cut Compound
Pro Polish- Foam Pad Polish- (As finishing Product)
Cutting compounds with heavy duty grit 1500-2000 grit count
Blue Soft Polishing/ Finishing Pads - Glaze & Cleaner Foam Pad -Unique Composition complements all glazes and light surface cleaners perfectly delivering a super fine finish for use with ultra fine polishes life FP or any glaze.
Use With:
Cut 7.0 Ultra Light Cut Compound
FP-Final Polish
EX Crème Glaze
Cutting compounds with heavy duty grit 1500-2000 grit count
Black Finishing Foam - Composition is firm enough to withstand added pressure during final finishing to remove buffer swirls. It has no cut and will apply thin, even coats of waxes, sealants, and glazes.
Use With:
Wet Mirror Finish
EX Crème Glaze
Revive Glaze
Extreme Depth Liquid Carnauba
Red Perfection Pad Ultra Fine Finishing Pad - This pad has a ultra soft composition for applying refined paste waxes and sealants as well as crème waxes. Provides full contact with paint surface to minimize the pressure applied by the user.
Use With:
Top Coat
Petes 53
E-Zyme Paste Wax
Can also be used when applying as final steps.
EX Crème Glaze
Revive Glaze
Extreme Depth Liquid Carnauba

Different jobs ask for different backing – plates, click here for a selection of our
best backing – plates, good screws ( to fit vitually everything) and many more
accessories for your pads, polishers and gear...
More Information
BrandChemical Guys
Product Regulation EU Dec 2024Chemical Guys 3501 Sepulveda Blvd CA 90505 Torrance E: sales@chemicalguys.com
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Write Us
Write us a note and we’ll get back to you as quickly as possible.
WhatsApp Chat WhatsApp Chat